Access Point Wireless Dual Band In-Wall 1200Mbps 802.11Ac Wave 2 (Eu Type, 802.3At Poe, 3 10/100/1000T Lan, 1 Rj11)



WDAP-W1200E Access Point Wireless Dual Band In-wall 1200Mbps 802.11ac Wave 2  (EU Type, 802.3at PoE, 3 10/100/1000T LAN, 1 RJ11)

Specifiche Tecniche
Interfaces LAN
2 x 10/100/1000BASE-TX RJ45 port
Auto-negotiation and auto MDI/MDI-X

PoE Port
1 x 10/100/1000Mbps auto MDI/MDI-X RJ45 port (rear panel)
※ IEEE 802.3af/at PD port

RJ11 Port
Six-position four-conductor (6P4C) modular jack
Antennas Gain: 4 x 2dBi antenna
Button Reset button (Press over 10seconds to reset the device to the factory default)
LED Indicators LAN1/LAN2/WAN/SYS
Dimensions (W x D x H) 86 x 45 x 86 mm
Weight 168 ± 5g
Power Requirements 48V DC IN, 0.5A, IEEE 802.3af/at PoE+
Power Consumption < 8W
Mounting In-wall mount
Wireless Interface Specifications
Standard IEEE 802.11ac
IEEE 802.11n 
IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
IEEE 802.11i
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x flow control
Media Access Control CSMA/CA
Data Modulation 802.11ac: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM)
802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM)
802.11b: DSSS (DBPSK / DQPSK / CCK)
Band Mode 2.4G / 5G concurrent mode
Frequency Range 2.4GHz: 
FCC: 2.412~2.462GHz
ETSI: 2.412~2.472GHz

FCC: 5.180~5.240GHz, 5.745~5.825GHz
ETSI: 5.180~5.700GHz
Operating Channels FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165 (9 channels)
ETSI: 36, 40, 44, 48, 100, 104, 108, 112, 116, 132, 136, 140 (12 channels)
5GHz channel list will vary in different countries according to their regulations.
RF Power <20dBm (EIRP)
Receive Sensitivity
Network Mode Data Rate Receive Sensitivity (dBm)
802.11b 1Mbps -88
11Mbps -85
802.11g 6Mbps -88
54Mbps -68
802.11n HT20 MCS0/MCS8 -95
MCS7/MCS15 -77
802.11n HT40 MCS0/MCS8 -93
MCS7/MCS15 -75
802.11a 6Mbps -92
54Mbps -75
802.11n HT20 MCS0/MCS8 -91
MCS7/MCS15 -72
802.11n HT40 MCS0/MCS8 -88
MCS7/MCS15 -70
802.11ac VHT20 MCS0 -92
MCS8 -70
802.11ac VHT40 MCS0 -89
MCS9 -65
802.11ac VHT80 MCS0 -87
MCS9 -61
Software Features
LAN Static IP/DHCP Client
Supports IP-MAC binding
  • Static IP
  • Dynamic IP
  • PPPoE
Wireless Mode
  • Access Point
  • Gateway
  • WISP
  • Repeater
  • Super WDS
Channel Width 20MHz, 40MHz, 80MHz
Encryption Security 64-/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Wireless Security Enable/Disable SSID Broadcast
Wireless – filtering of max. 32 MAC addresses
User Isolation
Max. SSIDs 8 ( 4 per radio)
Max. Clients 128 (100 is suggested, depending on usage)
Max. WDS Peers 4
Wireless QoS Supports Wi-Fi Multimedia (WMM)
Wireless Advanced Auto channel selection 
5-level transmit power control (100%, 75%, 50%, 25%, 12.5%)
Client limit control, coverage threshold
Wi-Fi channel analysis chart
Fast Roaming
Status Monitoring Device status, wireless client list
PLANET Smart Discovery
DHCP client table
System Log supports remote syslog server
VLAN IEEE 802.1Q VLAN (VID: 3~4094) 
SSID-to-VLAN mapping to up to 4 SSIDs
Self-healing Supports auto reboot settings per day/hour
Management Remote management through PLANET DDNS/Easy DDNS 
Configuration backup and restoration
Supports UPnP 
Supports IGMP Proxy 
Supports PPTP/L2TP/IPSec VPN Pass-through 
SNMP v1/v2c/v3 support, MIB I/II, Private MIB
Central Management* Applicable controllers: NMS-500/NMS-1000V, WS-1232P, WS-2864PVR
*The feature will be supported through firmware/system upgrade.
Environment & Certification
Temperature Operating: -20 ~ 55 degrees C
Storage: -40 ~ 70 degrees C
Humidity Operating: 10 ~ 90% (non-condensing)
Storage: 5 ~ 95% (non-condensing)
Regulatory CE, RoHS
Dettagli del prodotto
13 altri prodotti della stessa categoria:



Click for more products.
Nessun prodotto trovato.