Planet IFGS-624PTF: Switch Industriale con 4 Porte PoE+ 10/100TX e 2 Slot SFP Gigabit

Riferimento:IFGS-624PTF

Il IFGS-624PTF di Planet Technology è uno switch industriale non gestito dotato di 4 porte 10/100BASE-TX con supporto PoE+ e 2 slot SFP 1000BASE-X. Progettato per operare in condizioni ambientali estreme, è ideale per applicazioni IIoT e sistemi di automazione industriale, garantendo una trasmissione dati stabile e continua.

Descrizione

Switch Industriale IFGS-624PTF: 4 Porte PoE+ 10/100TX e 2 Slot SFP Gigabit

Switch Industriale IFGS-624PTF: 4 Porte PoE+ 10/100TX e 2 Slot SFP Gigabit

Affidabilità e Robustezza per Ambienti Industriali

Il IFGS-624PTF di Planet Technology è un switch Ethernet industriale non gestito, progettato per resistere a condizioni ambientali estreme. Con 4 porte PoE+ e 2 slot SFP Gigabit, consente la connessione di dispositivi alimentati come telecamere IP, access point wireless, e altri dispositivi IIoT, garantendo una trasmissione dati affidabile.

Caratteristiche Principali

  • PoE+ per Alimentazione Efficiente: supporta fino a 36W per porta, alimentando dispositivi come telecamere e access point.
  • Connettività Flessibile: 2 slot SFP Gigabit per estendere la rete tramite fibra ottica.
  • Resistenza Industriale: custodia in metallo IP40, resistente a sbalzi elettrici e interferenze elettromagnetiche.
  • Estensione PoE: modalità "Extend" per trasmissioni fino a 250m.
  • Range di Temperatura Operativa: da -40°C a 75°C, ideale per ambienti estremi.
  • Facilità di Installazione: montaggio su guida DIN o parete.

Applicazioni Ideali

Il IFGS-624PTF è la scelta ideale per:

  • Infrastrutture IIoT
  • Automazione Industriale
  • Reti di Sorveglianza
  • Sistemi di Trasporto Intelligenti

Specifiche Tecniche

  • Porte Ethernet: 4 x 10/100BASE-TX PoE+
  • Slot SFP: 2 x 1000BASE-X
  • Alimentazione: 12~54V DC
  • Consumo Energetico: massimo 65W
  • Dimensioni: 135 x 87.8 x 32 mm
  • Temperatura Operativa: -40°C a 75°C

Hardware Specifications
Copper Ports 4 x 10/100BASE-TX RJ45 TP Auto-MDI/MDI-X, auto-negotiation
PoE+ Injector Ports Four ports with 802.3at PoE+ injector function (Ports 1 to 4)
SFP Slots 2 x 1000BASE-X SFP interfaces
DIP Switch DIP-1-4
Position
OFF (default)/ON
Function
Standard/Port 1-4 Extended Mode
DIP-5
Position
OFF (default)/ON
Function
Standard/Ring
Note :
1.Power off the Industrial Ring Ethernet Switch before adjusting the DIP switch and then power it on.
2.Extend mode: PoE transmission distance of 250m at speed of 10Mbps.
3.The Ring function can connect to a simple Ring network with up to 8 units; the recovery time of data link can be as fast as 1ms.
4.Ring performance may vary depending on the length of the fiber optic and UTP cables.
5.The active Ring function is not compatible with the IEEE 802.1p class of service function.
Connector Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Alarm Provides one relay output for power failure
Alarm Relay current carry ability: 1A @ DC 24V
ESD Protection ±6KV air gap discharge
±6KV contact discharge
Surge Immunity 6KV DC
Enclosure IP40 type metal case
Installation DIN-rail kit and wall-mount ear
Dimensions (W x D x H) 50 x 86.1 x 135mm
Weight 613g
Power Requirements DC 12~54V
Redundant power with reverse polarity protection
Power Consumption / Dissipation Max. 7 watts/23.8BTU@54V DC input (System)
Max. 140 watts/477BTU@54V DC input
(Ethernet + PoE Full Loading)
LED 3 x LED for System and Power:
 Green: DC Power 1
 Green: DC Power 2
 Red: Alarm
2 x LED for Copper Ports (Ports 1 to 4):
 Green: 10/100 LNK/ACT
 Amber: PoE-in-Use
1 x LED for SFP interface (Ports 5 to 6)
 Green: 1G LNK/ACT
4 x LED for PoE Usage (W) (Low to high):
 Amber: 30W, 60W, 90W and 120W
Switch Specifications
Switch Processing Scheme Store-and-Forward
Switch Fabric 4.8Gbps
Throughput (packet per second) 3.57Mpps@64bytes
Address Table 4K entries
Jumbo Frame 16K bytes
Flow Control Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Power over Ethernet
PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type End-span
Power Pin Assignment 1/2 (+), 3/6 (-)
PoE Power Output Per port 54V DC, Max. 36 watts
PoE Power Budget (max.) 120W maximum @48-54V DC
100W maximum @24V DC
60W maximum @12V DC
Max. Number of Class 2 PDs 4
Max. Number of Class 3 PDs 4
Max. Number of Class 4 PDs 4
Standards Conformance
Standards Compliance IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet 1000BASE-T
IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.1p Class of Service (Works under Ring function disable)
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
PROFINET Traffic Pass-through with QoS
Regulatory Compliance FCC Part 15 Class A, CE
Stability Testing IEC60068-2-32 (Free fall)
IEC60068-2-27(Shock)
IEC60068-2-6 (Vibration)
Environment
Temperature Operating: -40~75 degrees C
Storage: -40~75 degrees C
Humidity Operating: 5~95% (Non-condensing)
Storage: 5~95% (Non-condensing)
Dettagli del prodotto
IFGS-624PTF
16 altri prodotti della stessa categoria:

Menu

Settings

Click for more products.
Nessun prodotto trovato.