Planet SGS-6310-48T6X: Switch L3 Stackable 48 Porte PoE+ Gigabit
Panoramica:
Lo switch PLANET SGS-6310-48T6X di Planet Technology è uno switch managed Layer 3 stackable con 48 porte Gigabit PoE+ e 6 porte SFP+ 10G. Offre prestazioni elevate, routing avanzato, stacking hardware e funzionalità di sicurezza complete per reti aziendali che richiedono connessioni affidabili e sicure per dispositivi PoE (telecamere IP, access point Wi-Fi, VoIP).
Caratteristiche principali:
- 48 porte RJ45 Gigabit PoE+ che forniscono alimentazione e dati fino a 30W per porta a dispositivi compatibili PoE.
- 6 porte SFP+ 10G per uplink ad alta velocità o connessioni di aggregazione per reti con esigenze di larghezza di banda elevate.
- Architettura di switching non bloccante a 216 Gbps per un forwarding dati fluido.
- Routing Layer 3 hardware-based con supporto per protocolli di routing statico, RIP, OSPF per IPv4 e IPv6.
- Funzionalità di stacking hardware fino a 8 switch per una gestione semplificata e scalabilità della rete.
- Ampie funzionalità di sicurezza, inclusi ACL, autenticazione 802.1X, prevenzione DoS e controlli delle tempeste broadcast/multicast/unicast sconosciuto.
- Gestione flessibile tramite console, Telnet, web browser e SNMP con supporto per SSH e SNMPv3 per connessioni sicure.
Benefici:
- Alimentazione dispositivi PoE direttamente dallo switch, eliminando la necessità di cavi di alimentazione separati.
- Fornisce connessioni uplink ad alta velocità per reti con esigenze di traffico elevate.
- Routing avanzato per un flusso di dati efficiente e connessioni inter-VLAN.
- Stacking hardware per una facile espansione della rete e gestione centralizzata.
- Funzionalità di sicurezza complete per proteggere la rete da minacce interne ed esterne.
- Gestione versatile per configurazione e monitoraggio semplici.
Applicazioni Tipiche:
- Reti aziendali di medie e grandi dimensioni.
- Reti convergenti voce, dati e video.
- Applicazioni di sorveglianza IP.
- Reti wireless ad alta densità.
- Reti con elevati requisiti di sicurezza.
Specifiche Tecniche | |
---|---|
Copper Ports | 48 10/100/1000BASE-T RJ45 copper ports |
10G SFP+ Ports | 6 10GBASE-SR/LR SFP+ interface Backward compatible with 1000BASE-SX/LX/BX SFP transceiver |
Console Port | 1 x RJ45-to-RS232 serial port (9600, 8, N, 1) |
DRAM | 512Mbytes |
Flash Memory | 16Mbytes |
Dimensions (W x D x H) | 440 x 280 x 44 mm |
Weight | 4300g |
Power Consumption | 48 watts/ 163.68 BTU |
Power Requirements- AC | AC: 100~240V, 50/60Hz |
Fan | 2 |
LED | System: SYS, PWR Green Ports: 10/100/1000T RJ45 Port: LNK/ACT Green 1/10G SFP+ Port: LNK/ACT Green |
Switching Specifications | |
Switch Architecture | Store-and-forward |
Switch Fabric | 216Gbps/non-blocking |
Switch Throughput | 160.7Mpps |
Address Table | 16K MAC address table with auto learning function |
ARP Table | 2K |
Routing Table | 2040 |
VLAN Interface | 64 |
IP Interface | 64 |
ACL Table | 1024 |
Shared Data Buffer | 1.5MB |
Jumbo Frame | 9KBytes |
Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
IPv4 Layer 3 Functions | |
IP Routing Protocol | Static route RIPv1/v2 OSPFv2 Hardware-based Layer 3 routing |
Routing Features | VRRP v1/v3 ARP ARP Proxy IGMP Proxy |
IPv6 Layer 3 Functions | |
IP Routing Protocol | RIPng OSPFv3 IPv6 LPM Routing IPv6 Policy-based Routing (PBR) IPv6 VRRPv3 IPv6 RA (Router Advertisement) Hardware-based Layer 3 routing |
Routing Features | Configured Tunnels GRE Tunnel ISATAP Tunnel,6 to 4 tunnel Manual tunnel |
Other | ICMPv6, IPv6 ND |
Layer 2 Functions | |
Port Configuration | Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Bandwidth control on each port Port loopback detect |
Port Status | Display each port’s speed duplex mode, link status, flow control status and auto negotiation status |
VLAN | 802.1Q tagged VLAN, up to 4K VLAN groups 802.1ad Q-in-Q (VLAN stacking) GVRP for VLAN management Private VLAN Edge (PVE) supported Protocol-based VLAN MAC-based VLAN |
Spanning Tree Protocol | STP, IEEE 802.1D (Classic Spanning Tree Protocol) RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol) MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN) Supports BPDU and root guard |
Multicast | IPv4 IGMP v1/v2/v3 snooping Querier mode support IPv6 MLD v1 snooping Multicast VLAN Register (MVR) Up to 1024 multicast groups (IPv4 + IPv6) |
Link Aggregation | IEEE 802.3ad LACP/static trunk Supports 64 groups with 8 ports per trunk group |
Bandwidth Control | TX/RX/Both At least 64Kbps step |
QoS | 8 priority queues on all switch ports Supports strict priority and Weighted Round Robin (WRR) CoS policies Traffic classification: CAR, HQoS, MAC/IP/TCP/UDP IEEE 802.1p CoS/ToS IPv4/IPv6 DSCP Port-based WRR Tail-Drop, WRED, flow monitoring and traffic shaping |
Ring | Supports ITU-G G.8032 ERPS Recovery time < 10ms @ 3units Recovery time < 50ms @ 16units |
Security Functions | |
Access Control List | Supports Standard and Expanded ACL IP-based ACL/MAC-based ACL Time-based ACL Up to 1024 entries |
Security | Port isolation, Port security, “IP+ MAC+ port” binding MAC sticky DAI & IP source guard, PPPoE+ L2/L3/L4 ACL flow identification Filtration Anti-attack from DDo S, TCP’s SYN Flood, UDP Flood Broadcast / multicast / unknown unicast storm-control Supports MD5, SHA-256, RSA-1024, AES256 |
AAA Authentication | TACACS+ and IPv4/IPv6 over RADIUS |
Network Access Control | IEEE 802.1x port-based network access control MAC-based authentication RADIUS/TACACS authentication |
Switch Management Functions | |
System Configuration | Console and Telnet Web browser SNMP v1, v2c |
Secure Management Interfaces | SSHv1/v2, TLSv1.2 and SNMPv3 |
System Management | Supports both IPv4 and Ipv6 addressing Supports the user IP security inspection for Ipv4/Ipv6 SNMP Supports MIB and TRAP Supports RMON 1, 2, 3, 9 four groups Supports IPv4/IPv6 FTP/TFTP Supports IPv4/IPv6 NTP Supports the RADIUS authentication for IPv4/IPv6 Telnet user name and password The right configuration for users to adopt RADIUS server’s shell management Supports Security IP safety net management function: avoid unlawful landing at nonrestrictive area Supports IPv4 and IPv6 DHCP server |
Event Management | Supports Syslog server for IPv4 and IPv6 |
Hardware Stacking | 8 members max. 2 10G SFP+ slots are functioned as Stacking Up and Down interfaces |
Hardware Stacking Compatibility List | SGS-6310-24T4X SGS-6310-24P4X SGS-6310-16S8C4XR SGS-6310-48T6X SGS-6310-48P6XR |
SNMP MIBs | RFC 1213 MIB-II RFC 1215 Internet Engineering Task Force RFC 1271 RMON RFC 1354 IP-Forwarding MIB RFC 1493 Bridge MIB RFC 1643 Ether-like MIB RFC 1907 SNMP v2 RFC 2011 IP/ICMP MIB RFC 2012 TCP MIB RFC 2013 UDP MIB RFC 2096 IP forward MIB RFC 2233 if MIB RFC 2452 TCP6 MIB RFC 2454 UDP6 MIB RFC 2465 IPv6 MIB RFC 2466 ICMP6 MIB RFC 2573 SNMP v3 notify RFC 2574 SNMP v3 vacm RFC 2674 Bridge MIB Extensions (IEEE 802.1Q MIB) RFC 2674 Bridge MIB Extensions (IEEE 802.1P MIB) |
Standard Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3z Gigabit 1000BASE-SX/LX IEEE 802.3ab Gigabit 1000BASE-T |