Espandi la tua rete PoE+ e alimenta i tuoi dispositivi in ambienti difficili con lo switch non gestito Gigabit PoE+ a 8 porte IGS-1020PTF di Planet Technology.
Caratteristiche principali:
- 8 porte PoE+ Gigabit: Alimenta fino a otto dispositivi PoE+ a 30 watt per porta con lo standard 802.3at.
- 2 porte SFP da 1 Gbps: Connetti uplink in fibra ottica per connessioni a lunga distanza.
- Robusto design industriale: Alloggiamento in metallo IP30 resistente a polvere, umidità e temperature estreme.
- Plug and Play: Installazione semplice e veloce senza configurazione necessaria.
- Gestione PoE integrata: Priorità PoE, budget PoE e monitoraggio dell'alimentazione PoE.
- Ampia gamma di alimentazione: Supporta alimentazione ridondante da 48V a 56V CC per una maggiore affidabilità.
Ideale per:
- Reti di sicurezza IP (telecamere PoE+)
- Sistemi di telefonia VoIP
- Punti di accesso wireless
- Automazione industriale
- Segnali digitali in ambienti difficili
Specifiche tecniche:
- Porte: 8 porte RJ45 10/100/1000 Mbps PoE+, 2 porte SFP 100/1000X
- Alimentazione: 48~56V DC ridondante
- Budget PoE: max. 240 watt
- Distanza PoE: fino a 100 metri (con cavo Cat. 5e o 6)
- Temperatura di funzionamento: -40 ~ 75°C
- Dimensioni: 66 x 106 x 152 mm
- Peso: 879 g
Perché scegliere l'IGS-1020PTF:
- Soluzione Plug and Play per reti PoE+ Gigabit in ambienti difficili.
- Robusto design industriale per un funzionamento 24/7/365.
- Gestione PoE integrata per un facile controllo dell'alimentazione.
- Ampia gamma di temperatura di funzionamento per diverse condizioni ambientali.
Specifiche Tecniche | |
---|---|
Copper Ports | 8 10/100/1000BASET RJ45 auto-MDI/MDI-X ports |
PoE Injector Ports | 8 ports with 802.3at PoE+ injector function (Ports 1 to 8) |
SFP Slots | 2 1000BASE-SX/LX/BX SFP interfaces (Ports 9 to 10) Compatible with 100BASE-FX SFP |
Connector | Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
DIP Switch | Standard/Extend mode (Extend mode for Ports 5 to 8 only) |
LED Indicators | 3 x LED for System and Power: Green: DC Power 1 Green: DC Power 2 Red: Power Fault Alarm 8 x LED for PoE Copper Port (Ports 1 to 8): Green: LNK/ACT (10/100/1000Mbps) Amber: PoE-in-Use 2 x LED for 100/1000X Fiber Port (Ports 9 to 10): Green: LNK/ACT (100/1000Mbps) Amber: 1000Mbps 4 x LED for PoE Usage Amber: 60W, 120W, 180W and 240W |
Power Requirements | 48~56V DC, 6A (max.) |
Power Consumption | Max. 3.92 watts/13BTU@56V DC input (System) Max. 7.28 watts/24BTU@56V DC input (Ethernet Full Loading) Max. 251.2 watts/857BTU@56V DC input (Ethernet + PoE Full Loading) |
Dimensions (W x D x H) | 66 x 106 x 152 mm |
Weight | 879g |
Enclosure | IP30 metal case |
Installation | DIN-rail/ wall-mount/side wall-mount |
ESD Protection | 6KV |
Switch Specifications | |
Switch Architecture | Store-and-Forward |
Switch Fabric | 20Gbps |
Throughput (packet per second) | 14.8Mpps@64bytes |
Address Table | 8K entries |
Buffer Memory | 4M bits on-chip buffer memory |
Jumbo Frame | 9Kbytes |
Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex |
Power over Ethernet | |
PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type | End-span |
Power Pin Assignment | 1/2 (+), 3/6 (-) |
PoE Power Output | Per port 48~56V DC Max. 30 watts |
PoE Power Budget (max.) | 240W maximum |
Max. Number of Class 3 PDs@25W | 8 |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3z Gigabit Ethernet over Fiber Optic IEEE 802.3az Energy Efficient Ethernet (EEE) IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet |
Environment | |
Temperature | Operating: -40~75 degrees C Storage: -40~85 degrees C |
Humidity | Operating: 5~90% (non-condensing) Storage: 5~90% (non-condensing) |