POE-E201 IEEE 802.3at Power over Gigabit Ethernet Extender
Il POE-E201 di Planet Technology è un extender PoE Gigabit Ethernet progettato per estendere la portata di alimentazione e dati PoE standard 802.3at/af fino a 500 metri su cavo Cat.5e/6, superando il limite standard di 100 metri. Ideale per collegare in rete dispositivi PoE remoti come telecamere di sicurezza, punti di accesso wireless, telefoni VoIP e altro su lunghe distanze.
Vantaggi principali:
- Estende la portata PoE: Aumenta la distanza di alimentazione e dati PoE fino a 500 metri, eliminando la necessità di prese di corrente vicine per dispositivi remoti.
- Flessibilità di installazione: Supporta l'installazione a catena daisy-chain fino a 4 unità, raggiungendo distanze ancora maggiori.
- Compatibilità PoE: Funziona con entrambi gli standard PoE 802.3af (15.4W) e 802.3at (30W) per alimentare una vasta gamma di dispositivi.
- Prestazioni Gigabit: Supporta velocità di rete Gigabit Ethernet (10/100/1000 Mbps) per un trasferimento dati ad alta velocità.
- Design compatto: Dimensioni contenute per un posizionamento discreto.
- Indicatori LED: Visualizzano lo stato di alimentazione, LAN e PoE per un facile monitoraggio.
Specifiche tecniche:
- Porte: 2 x RJ-45 (LAN IN, LAN OUT) con PoE in/out automatico
- Standard PoE: IEEE 802.3af/at
- Potenza in uscita PoE: 52V DC, 510mA, max. 26W
- Distanza massima: 500 metri (1 unità), fino a 2000 metri (4 unità in catena)
- Velocità di rete: 10/100/1000 Mbps
- Tabella MAC: 2K voci
- Memoria buffer: 512 Kb
- Jumbo frame: 10 K byte
- LED: PoE IN, LAN Data, PoE OUT
- Protezione: ESD, surge
- Dimensioni: 94 x 70 x 26 mm
- Peso: 197g
- Temperatura di funzionamento: -10 ~ 60°C
- Umidità di funzionamento: 5 ~ 95% (senza condensa)
Ideale per:
- Reti aziendali con dispositivi PoE remoti
- Videosorveglianza IP con telecamere PoE
- Reti wireless con punti di accesso PoE
- Reti VoIP con telefoni IP PoE
- Altre applicazioni IoT che richiedono alimentazione PoE a lunga distanza
Specifiche Tecniche |
Modello |
POE-E201 |
Interfaces |
LAN IN |
1 x 10/100/1000Base-T Ethernet with IEEE 802.3at / 802.3af PoE “Data + DC” in Auto MDI/MDI-X, Auto-Negotiation RJ-45 connector |
LAN OUT |
1 x 10/100/1000Base-T Ethernet with IEEE 802.3at / 802.3af PoE “Data + DC” out Auto MDI/MDI-X, Auto-Negotiation RJ-45 connector |
Power over Ethernet |
PoE Standard |
IEEE 802.3af (Power over Ethernet) IEEE 802.3at (High Power over Ethernet Pre-Standard) |
PoE Power Supply Type |
Mid-Span / Type B |
PoE Power Output |
52V DC, 510mA, Max. 26 Watts |
Power Pin Assignment |
4/5(+), 7/8(-) |
Maximum Distance |
4 units, daisy-chain installation with 500m support |
Hardware Specification |
Data Rate |
10/100/1000Mbps |
Switch Architecture |
Store-and-Forward |
Switch Throughput |
10Mbps:14880pps@64Bytes 100Mbps:148810pps@64Bytes 1000Mbps:1488000pps@64Bytes |
Maximum Frame Size |
1552Bytes |
Flow Control |
Back pressure for Half-Duplex IEEE 802.3x Pause Frame for Full-Duplex |
LED Indicators |
■ 1 x PoE IN (Green) ■ 1 x LAN Data (Green) ■ 1 x PoE OUT (Green) |
Protection |
ESD (Ethernet): 2KV (TBD) Surge (EFT for power) : 2KV (TBD) |
Dimension (W x D x H) |
94 x 70 x 26 mm |
Weight |
197g |
Power Requirement |
IEEE 802.3at compliant with voltage within 52V-56V DC |
Power Consumption |
3.2 Watts (system maximum) |
Mechanical |
Metal / Wall Mountable |
Network Cable |
10Base-T: 4-Pair UTP Cat. 5 up to 100m (328ft) 100Base-TX: 4-Pair UTP Cat. 5 up to 100m (328ft) 1000Base-T: 4-Pair UTP Cat. 5e, 6, up to 100m (328ft) EIA/TIA- 568 100-ohm STP (100m, 328ft) |
Standards Conformance |
Regulation Compliance |
FCC Part 15 Class A, CE |
Standard Compliance |
IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet (Pre-standard) IEEE 802.3x Flow Control |
Environment |
Operating |
Temperature: -10 ~ 60 Degree C Relative Humidity: 5 ~ 95% (non-condensing) |
Storage |
Temperature: -40 ~ 85 Degree C Relative Humidity: 5 ~ 95% (non-condensing) |