Click for more products.
Nessun prodotto trovato.
Serial Device Server Industriale 1-Porta Rs232/Rs422/Rs485 Ip30 (1 X 10/100Tx, -40 A 75°C, Dual 9~48V)
Serial Device Server Industriale 1-Porta Rs232/Rs422/Rs485 Ip30 (1 X 10/100Tx, -40 A 75°C, Dual 9~48V)

Serial Device Server Industriale 1-Porta Rs232/Rs422/Rs485 Ip30 (1 X 10/100Tx, -40 A 75°C, Dual 9~48V)

Riferimento:ICS-2105AT

Planet
Serial Device Server Industriale 1-Porta Rs232/Rs422/Rs485 Ip30 (1 X 10/100Tx, -40 A 75°C, Dual 9~48V)
Modbus Gateway 2-Porte Rs232/422/485 (-10 A 60°C)
Serial Device Server Industriale 1-Porta Rs232/Rs422/Rs485 Ip30 (1 X 10/100Tx, -40 A 75?C, Dual 9~48V)
Descrizione


ICS-2105AT Serial Device Server Industriale 1-Porta RS232/RS422/RS485 IP30 (1 x 10/100TX, -40 a 75°C, dual 9~48V) 



Serial Interface
Serial Ports1 x DB9 male for RS232
1 x 4-Pin Terminal block for RS422 / RS485
Serial StandardsRS232 / 4-wire RS422 or RS485 / 2-wire RS485
Baud Rate (Data Rate)50bps to 921Kbps
Data Bits5, 6, 7, 8
Parity Type1, 1.5, 2
Stop BitOdd, Even, None, Space, Mark
Flow ControlRTS/CTS and DTR/DSR (RS232 only) 
XON/XOFF
SignalsRS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS422: Tx+, Tx-, Rx+, Rx-, GND
4-wire RS485: Tx+, Tx-, Rx+, Rx-, GND
2-wire RS485: Data A (+), Data B (-), GND
Pin Assignment
PinRS232RS422
RS485-4W		RS485-2W
1DCDTxD+--
2RxDTxD---
3TxDRxD-Data-
4DTRRxD+Data+
5GNDGNDGND
6DSR----
7RTS----
8CTS----
9------
Ethernet Interface
Ethernet Ports1 x SFP
Standard100BASE-FX
Distance2km to 120km, vary on SFP modules
ESD Protection6KV
Surge Protection2KV
Hardware
InstallationDIN-rail kit and wall-mount ear
EnclosureIP 30 metal
Dimensions (W x D x H)32 x 97 x 135 mm
Weight390g
LED IndicatorsSystem: Power 1, Power 2, Fault, SYS
SFP: Link/Active
Serial Port: Tx and Rx
Power Requirements9~48V DC / 24V AC, redundant power with reverse polarity protection
Power ConsumptionFull Loading
9VDC: 0.44A (3.96 watts)
12VDC: 0.33A (4 watts)
24VDC: 0.17A (4.08 watts)
48VDC: 0.1A (4.8 watts)
ConnectorRemovable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
AlarmProvides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24V
Reset Button< 5 sec: System reboot
> 5 sec: Factory default
Management
Management InterfacesWeb management
Telnet Console management
Windows-based VCOM Utility management
SNMPv1, v2c / SNMP Trap
UNI-NMS monitoring
PLANET Smart Discovery Utility
IP VersionIPv4 and IPv6
Operation ModeTCP Server
TCP Client
UDP Client
Virtual COM
RFC2217
Telnet Server
Pair Connection – Remote (Slave)
Pair Connection – Local (Master)
Modbus converter server / client
Virtual COM Utility Platform SupportsWindows-based only:
　Windows XP
　Windows Server 2003
　Windows 7
　Windows Server 2008
　Windows 8 (Must install the latest version of WinPcap)
　Windows Server 2012 (Must install the latest version of WinPcap)
　Windows 10
SecurityAllows maximum 4 accessible IP address hosts/ranges
SNMP MIBsRFC1213 MIB-II
RFC1317 RS232-like MIB
Standards Conformances
Regulatory ComplianceFCC Part 15 Class A, 
CE Certification Class A
Stability TestingIEC60068-2-32 (Free fall)
IEC60068-2-27 (Shock) 
IEC60068-2-6 (Vibration)
StandardsIEEE 802.3 10BASE-T 
IEEE 802.3u 100BASE-FX
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 854 Telnet
RFC 958 NTP
RFC 1591 DNS (client only)
RFC 1908 SNMPv2c
RFC 2068 HTTP
RFC 2131 DHCP Client
RFC 2732 Format for Literal IPv6 Addresses in URL's
RFC 3315 DHCPv6 Client
RFC 3513 IPv6 Addressing Architecture
RFC 3596 DNSv6
RFC 4443 ICMPv6
EIA/TIA RS232/422/485
Regulatory ApprovalRoHS
Environment
Operating Temperature-40 ~ 75 degrees C
Storage Temperature-40 ~ 85 degrees C
Humidity5 ~ 95% (non-condensing)


Dettagli del prodotto
ICS-2105AT
12 altri prodotti della stessa categoria:

Menu

Settings

Click for more products.
Nessun prodotto trovato.

Please sign in first.

Sign in