Media Converter 10G 5G 2,5G 1G 100Mbps 1P.10G-X SFP





XT-705AT Media Converter industriale da 10G/5G/2.5G/1G/100M rame a 10GBASE-X SFP+



Specifiche Tecniche
Copper Interface 1 x 10000/5000/2500/1000/100 BASE-T RJ45
Auto-MDI/MDI-X, auto-negotiation
Fiber Optic Interface 1 10GBASE-SR/LR SFP+ interface.
Connector Removable 6-pin terminal block
Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2
Alarm Provides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24V
LED System:
 PWR (Green)
10G/5G/2.5G/1G/100 BASE-T RJ45 Interfaces:
 1G/10G LNK (Orange)
 5G/2.5G/100M LNK (Green)
ESD Protection 6KV DC
Enclosure Compact-sized metal case
Installation Desktop, wall mountable
Media convert Chassis installation
Optional DIN-rail kit
Dimensions (W x D x H) 94 x 70 x 26mm
Weight 180g (device only)
Power Consumption / Dissipation 5V DC, 2A max.
Power Requirements 3.75 watts / 12.8 BTU per hour max.
Converter Specifications
Flow Control Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
Fabric 20Gbps
Address Table 9K entries, automatic source address learning and aging
Jumbo Frame 16K
Network Cables 10G/5G/2.5G/1G/100M BASE-T:
 10G--Cat 6A/Cat 7
 5G--Cat 6/Cat 6A/Cat 7
 1G/2.5G--Cat 5e/Cat 6/Cat 6A/ Cat 7
 100M--Cat 5/Cat 5e/Cat 6/Cat 6A/ Cat 7
 Cat 5/5e/6/6A/7 UTP cable (100 meters, max.)
 EIA/TIA-568 100-ohm STP (100 meters, max.)
 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 300m
 9/125μm single-mode fiber optic cable, up to 60km
Standards Conformance
Standards Compliance IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3bz 2.5G/5GBASE-T
IEEE 802.3an 10GBASE-T
IEEE 802.3ae 10Gbps Ethernet
IEEE 802.3x full-duplex flow control
Regulation Compliance FCC Part 15 Class A, CE
Temperature 0 ~ 50 degrees C
Humidity 5 ~ 95%, relative humidity (non-condensing)

Dettagli del prodotto
16 altri prodotti della stessa categoria:



Click for more products.
No produts were found.