IGS-10020PT Switch Gigabit POE+ SNMP 8-Porte 10/100/1000 Base-T IP30 + 2-Porte SFP Gigabit (-40 to 75 C) – 802.3af
IGS-10020PT: Switch PoE Gigabit Robusto e Compatto di PLANET Technology
L’IGS-10020PT è uno switch Gigabit PoE+ a 8 porte progettato per reti mission-critical in ambienti difficili. Offre alimentazione e connettività affidabili a dispositivi come telecamere IP, access point wireless e telefoni VoIP.
Caratteristiche principali:
- 8 porte Gigabit PoE+: fornisce alimentazione e dati fino a 100 metri su cavo Ethernet standard.
- PoE+ fino a 15.4 watt per porta: supporta dispositivi PoE a bassa potenza.
- 2 porte SFP Gigabit: estende la connessione a lunga distanza tramite fibra ottica.
- Gestione SNMP: consente un monitoraggio e una configurazione semplici della rete.
- Robusto design IP30: resiste a temperature estreme, polvere, vibrazioni e urti.
- Ampia gamma di temperatura operativa: funziona in ambienti con temperature da -40°C a 75°C.
- Dimensioni compatte: ideale per spazi limitati.
Vantaggi:
- Soluzione PoE+ conveniente: alimenta direttamente i dispositivi sulla rete, eliminando la necessità di prese di corrente aggiuntive.
- Flessibilità di connessione: supporta sia cavi in rame che in fibra ottica.
- Gestione centralizzata: facilita la configurazione e il monitoraggio della rete.
- Affidabilità industriale: garantisce prestazioni stabili in ambienti difficili.
- Installazione facile: montaggio a parete o su guida DIN per un’implementazione rapida.
Ideale per:
- Reti aziendali di piccole e medie dimensioni: collega e alimenta dispositivi PoE in uffici, magazzini e fabbriche.
- Reti in ambienti difficili: supporta applicazioni esterne, in cantieri, strutture remote e ambienti industriali.
- Sistemi di sorveglianza IP: alimenta telecamere PoE per la sicurezza perimetrale e il monitoraggio degli impianti.
| Specifiche Tecniche | |
| Copper Ports | 8 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X ports |
| SFP/mini-GBIC Slots | 2 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10) Compatible with 100BASE-FX SFP |
| Console | 1 x RJ45-to-RS-232 serial port (115200, 8, N, 1) |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 20Gbps / non-blocking |
| Throughput (packet per second) | 14.8Mpps@ 64Bytes packet |
| Address Table | 8K entries, automatic source address learning and ageing |
| Shared Data Buffer | 4Mbits |
| Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
| Jumbo Frame | 9Kbytes |
| Reset Button | < 5 sec: System reboot > 10 sec: factory default |
| ESD Protection | 6KV DC |
| EFT Protection | 6KV DC |
| Enclosure | IP30 aluminum case |
| Installation | DIN rail kit and wall-mount kit |
| Connector | Removable 6-pin terminal block for power input Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 Removable 6-pin terminal block for DI/DO interface Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND |
| Alarm | One relay output for power fail. Alarm Relay current carry ability: 1A @ DC 24V |
| DI/DO | 2 Digital Input (DI): Level 0: -24V~2.1V (±0.1V) Level 1: 2.1V~24V (±0.1V) Input Load to 24V DC, 10mA max. 2 Digital Output (DO): |
| LED Indicator | System: Power 1 (Green) Power 2 (Green) Fault Alarm (Green) Ring (Green) Ring Owner (Green) Per 10/100/1000T RJ45 Ports: PoE In-Use (Orange) LNK/ACT (Green) Per SFP Interface: 1000 (Orange) LNK/ACT (Green) |
| Dimensions (W x D x H) | 152 x 107x 72 mm |
| Weight | 1684g |
| Power Requirements | DC 48V |
| Power Consumption | 31.9 watts / 108.78BTU (Full loading without PoE function) 161.9 watts / 522.08BTU (Full loading with PoE function) |
| Power Over Ethernet | |
| PoE Standard | IEEE 802.3af Power over Ethernet / PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | Per Port 48V DC, 350mA . Max. 15.4 watts |
| Power Pin Assignment | 1/2(+), 3/6(-) |
| PoE Power Budget | 130W maximum (depending on power input) |
| Max. number of Class 2 PD | 8 |
| Max. number of Class 3 PD | 8 |
| Layer 2 Function | |
| Basic Management Interfaces | Console, Telnet, Web Browser, SNMP v1, v2c |
| Secure Management Interfaces | SSH, SSL, SNMP v3 |
| Port Configuration | Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable / enable Power saving mode control |
| Port Status | Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status |
| Port Mirroring | TX / RX / both 1 to 1 monitoring |
| VLAN | 802.1Q tagged based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4094 VLAN IDs |
| Link Aggregation | IEEE 802.3ad LACP / static trunk Supports 5 trunk groups with 8 ports per trunk |
| QoS | Traffic classification based, Strict priority and WRR 8-level priority for switching – Port number – 802.1p priority – 802.1Q VLAN tag – DSCP/TOS field in IP packet |
| IGMP Snooping | IGMP (v1/v2/V3) Snooping, up to 255 multicast groups IGMP Querier mode support |
| MLD Snooping | MLD (v1/v2) Snooping, up to 255 multicast groups MLD Querier mode support |
| Access Control List | IP-based ACL / MAC-based ACL Up to 123 entries |
| Bandwidth Control | Per port bandwidth control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps |
| SNMP MIBs | RFC 1213 MIB-II IF-MIB RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Group 1, 2, 3 and 9) RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB |
| Layer 3 Function | |
| IP Interfaces | Max. 8 VLAN interfaces |
| Routing Table | Max. 32 routing entries |
| Routing Protocols | IPv4 software static routing IPv6 software static routing |
| Standards Conformance | |
| Regulation Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) |
| Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP version 1 RFC 2236 IGMP version 2 |
| Environment | |
| Operating Temperature | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |