XGS-6320-8UP4X Switch Ethernet gestito Layer 3 con 8 porte 10GBASE-T 95W 802.3bt PoE+ e 4 porte 10GBASE-X SFP+
L’ XGS-6320-8UP4X di Planet Technology è uno switch Ethernet Layer 3 gestito, progettato per offrire una connettività di rete ad alta velocità e alimentazione avanzata PoE per ambienti aziendali, educativi o di data center. Con 8 porte 10GBASE-T RJ45 che supportano auto-negoziazione per velocità di 10G/5G/2.5G/1G/100Mbps e 4 porte 10GBASE-SR/LR SFP+ compatibili con trasceivers 1000BASE-SX/LX/BX e 2500BASE-X, questo switch fornisce una flessibilità eccezionale per vari scenari di rete.
Le porte RJ45 supportano la funzione PoE++ 802.3bt, in grado di erogare fino a 95 watt per porta, rendendolo ideale per alimentare dispositivi ad alta potenza come telecamere di sorveglianza PTZ, punti di accesso Wi-Fi 6, e sistemi di illuminazione LED, oltre a fornire una solida connessione di rete.
Con una capacità di switch fabric di 240Gbps e un throughput di 178.57 Mpps, l’XGS63208UP4X garantisce un’elaborazione dei dati ad alta capacità e senza blocchi, ottimale per gestire grandi volumi di traffico di rete e supportare applicazioni ad alta larghezza di banda.
Le funzioni avanzate di Layer 3 includono il routing statico IPv4 e IPv6, OSPF per la gestione dinamica dei percorsi, e un’ampia gamma di funzionalità di Layer 2 come VLAN, QoS, e Spanning Tree Protocol, fornendo agli amministratori la flessibilità per ottimizzare la prestazione della rete.
L’ XGS-6320-8UP4X è inoltre dotato di funzionalità di sicurezza avanzate, tra cui ACL, port security, IP source guard, e Dynamic ARP inspection per proteggere la rete da accessi non autorizzati e altre minacce di sicurezza. La gestione dello switch è semplificata attraverso interfacce web, SNMP, Telnet, con supporto per la gestione sicura tramite SSH e SNMPv3, consentendo un monitoraggio e una configurazione efficaci della rete.
In sintesi, l’ XGS-6320-8UP4X di PLANET rappresenta una soluzione di networking potente e versatile, ideale per reti che richiedono alte prestazioni, flessibilità e una gestione avanzata dell’alimentazione PoE.
| Specifiche Tecniche | |
|---|---|
| Copper Ports | 8 10GBASE-T RJ45 auto negotiation ports (Ports 5 to 12) Backward compatible with 10G/5G/2.5G/1G/100Mbps data rate |
| SFP+ Slots | 4 10GBASE-SR/LR SFP+ ports (Ports 1 to 4) Backward compatible with 1000BASE-SX/LX/BX and 2500BASE-X SFP transceivers |
| PoE Injector Port | 8 ports with 802.3bt PoE++ injector function from Ports 5 to 12 |
| Console | 1 x RJ45-to-DB9, RS232 serial port (115200, 8, N, 1) |
| Reset Button | < 5 sec: System reboot > 5 sec: Factory default |
| RAM | 2,048Mbytes |
| Flash Memory | 128Mbytes |
| Dimensions (W x D x H) | 440 x 300 x 44mm, 1U height |
| Weight | 4,285g |
| Power Requirements | 100~240V AC, 50/60Hz, 5A max. |
| Power Consumption | AC 110V: 34.5W / 117.7BTU (No loading) ; 502W / 1712.9BTU (Full loading) AC 220V: 33.4W / 114BTU (No loading) ; 488W / 1665.1BTU (Full loading) |
| ESD Protection | 6KV DC |
| Surge Protection | 4KV DC |
| Fan | 3 smart fans |
| LED | System: PWR (Green), SYS (Green), Ring (Green), Ring Owner (Green) 10GBASE-T RJ45 ports: 100/1000 LNK/ACT (Green) 2.5G/5G/10G LNK/ACT (Amber) 802.3bt PoE-in-Use (Green) 802.3at PoE-in-Use (Amber) 10GBASE-X SFP+ ports: 1000 LNK/ACT (Green) 2.5G/10G LNK/ACT (Amber) |
| Switching Specifications | |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 240Gbps/non-blocking |
| Throughput | 178.57 @ 64Bytes packet |
| Address Table | 32K entries, automatic source address learning and aging |
| Shared Data Buffer | 32Mbits |
| Flow Control | IEEE 802.3x pause frame for full duplex Back pressure for half duplex |
| Jumbo Frame | 10Kbytes |
| Power Over Ethernet | |
| PoE Standard | IEEE 802.3bt PoE++ Type-4 PSE Backward compatible with 802.3at PoE+ PSE |
| PoE Power Supply Type | 802.3bt End-span Mid-span Force |
| PoE Power Output | Per port 54V DC 802.3bt Type-4 mode: maximum 95 watts End-span mode: maximum 36 watts Mid-span mode: maximum 36 watts Force mode: maximum 95 watts |
| Power Pin Assignment | 802.3bt: 1/2(-), 3/6(+),4/5(+), 7/8(-) End-span: 1/2(-), 3/6(+) Mid-span: 4/5(+), 7/8(-) |
| PoE Power Budget | 420W maximum |
| Max. Number of Type 2 PDs | 8 |
| Max. Number of Type 3 PDs | 7 |
| Max. Number of Type 4 PDs | 4 |
| PoE Management Functions | |
| Active PoE Device Detection | Yes |
| PoE Power Recycling | Yes, daily or predefined schedule |
| PoE Schedule | 4 schedule profiles |
| PoE Extend Mode | Yes, max. 160 meters |
| PoE System Management | System PoE Admin control Total PoE power budget control Auto power input and PoE budget control PoE Legacy mode Over-temperature threshold alarm PoE usage threshold alarm |
| PoE Port Management | Port Enable/Disable/Schedule PoE mode control 802.3bt 802.3at End-span 802.3at Mid-span Force mode Port Priority |
| Layer 3 Functions | |
| IP Interfaces | Max. 128 VLAN interfaces |
| Routing Table | Max. 512 static route entries Max. 3072 routing table entries |
| Routing Protocols | IPv4 RIPv2 IPv4 OSPFv2 IPv6 OSPFv3 IPv4 hardware static routing IPv6 hardware static routing |
| Layer 2 Functions | |
| Port Configuration | Port disable/enable Flow Control disable/enable Port link capability control |
| Port Status | Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status |
| Port Mirroring | TX/RX/Both Many-to-1 monitor RMirror – Remote Switched Port Analyzer (Cisco RSPAN) Supports up to 5 sessions |
| VLAN | IEEE 802.1Q tag-based VLAN, IEEE 802.1ad Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN MVR (Multicast VLAN Registration) GVRP Up to 4K VLAN groups, out of 4094 VLAN IDs |
| Spanning Tree Protocol | IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) Supports 7 MSTP instances BPDU Guard, BPDU filtering and BPDU transparent Root Guard |
| Link Aggregation | IEEE 802.3ad LACP (static trunk) Supports 6 trunk groups with 12 ports per trunk |
| IGMP Snooping | IPv4 IGMP (v1/v2/v3) snooping IPv4 IGMP querier mode support Supports 255 IGMP groups |
| MLD Snooping | IPv6 MLD (v1/v2) snooping, IPv6 MLD querier mode support Supports 255 MLD groups |
| Bandwidth Control | Per port bandwidth control Ingress: 10Kbps~13128Mbps Egress: 10Kbps~13128Mbps |
| Ring | Supports ERPS, and complies with ITU-T G.8032 Recovery time < 10ms @ 3 nodes Recovery time <50ms @ 16 nodes Supports Major ring and sub-ring |
| Synchronization | IEEE 1588v2 PTP(Precision Time Protocol) Peer-to-peer transparent clock End-to-end transparent clock |
| QoS | Traffic classification based, strict priority and WRR 8-level priority for switching Port number 802.1p priority 802.1Q VLAN tag DSCP/TOS field in IP packet |
| Security Functions | |
| Access Control List | IP-based ACL/MAC-based ACL ACL based on: MAC Address IP Address Ethertype Protocol Type VLAN ID DSCP 802.1p Priority Up to 512 entries |
| Security | Port security IP source guard, up to 512 entries Dynamic ARP inspection, up to 1K entries Command line authority control based on user level Static MAC address, up to 64 entries |
| AAA | RADIUS client TACACS+ client |
| Network Access Control | IEEE 802.1x port-based network access control MAC-based authentication |