GSW-2620HP Switch PoE 802.3at 24 Porte 10/100/1000T + 2Porte 1000SFP (220W)
Specifiche Tecniche | |
10/100/1000BASE-T MDI/MDIX Ports | 24 |
1000BASE-X SFP Interfaces | 2 |
PoE Injector Port | 24 ports with 802.3at PoE injector function with Port-1 to Port-24 |
Switch Architecture | Store-and-Forward |
Switch Fabric | 52Gbps/non-blocking |
Switch Throughput@64 bytes | 38.6Mpps@64Bytes |
MAC Address Table | 8K entries, automatic source address learning and aging |
Maximum Frame Size | 9216 bytes |
Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
LED |
System: Power (Green) 10/100/1000T RJ45 Interfaces |
LCD Monitor | ■ PoE loading of each port ■ Total PoE power usage ■ Total PoE budget ■ System status, such as overload, low voltage, over voltage and high temperature |
DIP Switch | Selectable operation mode ■ Standard ■ VLAN ■ Extend + VLAN |
Dimensions (W x D x H) | 445 x 207 x 45 mm (1U height) |
Enclosure | Metal |
Weight | 2.85kg |
Power Requirements | 100~240V AC, 50/60Hz, 4A (max.) |
Thermal Fan | 2 |
Power over Ethernet | |
PoE Standard | IEEE 802.3af Power over Ethernet/PSE IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Output | Per port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af) Per port 52V DC, 600mA. max. 30 watts (IEEE 802.3at) |
Power Pin Assignment | Odd port: 1/2(+), 3/6(-) Even port: 4/5(+), 7/8(-) |
PoE Power Budget | 220 watts |
Max. Number of Class 2 PDs | 24 |
Max. Number of Class 3 PDs | 14 |
Max. Number of Class 4 PDs | 7 |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3z Gigabit SX/LX IEEE 802.3x flow control and back pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus |
Environment | |
Operating | Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Storage | Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |