ISW-504PT - Switch Fast Ethernet 5-Porte 10/100Base-TX IP30 Slim (-40 a 75°C)
Specifiche tecniche | |||
Modello | ISW-504PT | ||
10/100Base-TX Ports | 5 | ||
IEEE 802.3af PoE ports | 4 | ||
Dimension (D x W x H) | 135 x 87.8 x 56 mm | ||
Weight | 842g | ||
Power LED | Power1, Power2 and Fault Port 1~4: PoE in-use, LNK / ACT Port 5: LNK / ACT | ||
Power Requirement | 24 or 48 VDC input Redundant power with polarity reverse protection function | ||
Installation | DIN Rail kit and Wall Mount ear | ||
Alarm | Provides one relay output for power fail Alarm Relay current carry ability: 1A @ DC 24V | ||
Power over Ethernet | |||
PoE Standard | IEEE 802.3af Power over Ethernet / PSE | ||
PoE Power Supply Type | End-Span | ||
PoE Power Output | Per Port 48V DC, 350mA . Max. 15.4 Watts | ||
Power Pin Assignment | 1/2(+), 3/6(-) | ||
Switch Specification | |||
Switch Processing Scheme | Store-and-Forward | ||
Address Table | 2K entries | ||
Flow Control | Back Pressure for Half Duplex IEEE 802.3x Pause Frame for Full Duplex | ||
Switch fabric | 1Gbps | ||
Throughput (packet per second) | 0.74Mpps@64bytes | ||
Network cables | 10/100Base-TX: Cat. 3, 4, 5, 5e and 6 UTP cable (100meters max.) EIA/TIA-568 100-ohm STP (100meters, max.) | ||
Regulation Compliance | FCC Part 15 Class A, CE | ||
Stability Testing | IEC60068-2-32 (Free Fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration) | ||
Standard Compliance | IEEE 802.3:Ethernet IEEE 802.3u:Fast Ethernet IEEE 802.3x:Flow Control IEEE 802.3af:Power over Ethernet | ||
Environment | |||
Temperature | Operating: -40~75 Degree C Storage: -40~85 Degree C | ||
Humidity | Operating: 5~90%, Storage: 5~90% (Non-condensing) |