Switch Fast Eth. PoE Layer 2 16-Porte 10/100Base-TX

Riferimento:FGSW2624HPS4

Descrizione

 

 

FGSW2624HPS4 Switch Fast Eth. PoE Layer 2 16-Porte 10/100Base-TX + 2-Port Gigabit TP/SFP Opz. - (420W) - 802.3at

 

 

Specifiche Tecniche
10/100Mbps Copper Ports 24 10/100BASE-TX RJ45 auto-MDI/MDI-X ports
Gigabit Copper Ports 2 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots 2 1000BASE-X SFP interfaces, shared with Port-25 to Port-26
Switch Architecture Store-and-Forward
Switch Fabric 8.8Gbps / non-blocking
Throughput 6.54Mpps@64Bytes
Address Table 4K entries, automatic source address learning and ageing
Shared Data Buffer 2.75Mb embedded memory for packet buffers
Flow Control IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Maximum Transmit Unit 1518 Bytes
Reset Button < 5 sec: System reboot
> 5 sec: Factory default
Dimensions (W x D x H) 440 x 300 x 44.5 mm, 1U height
Weight 4566g
Power Consumption Max. 513 watts / 1750.4 BTU
ESD Protection Contact Discharge 4KV DC
Air Discharge 8KV DC
LED System:
Power (Green)
10/100BASE-TX RJ45 Interfaces (Port 1 to Port 24):
10/100Mbps LNK/ACT (Green)
PoE-in-Use (Orange)
10/100/1000BASE-T RJ45 / SFP Interfaces (Port 25 to Port 26):
LNK/ACT (Green)
100/1000 (Green)
PoE Usage
100W, 200W, 300W, 400W (Orange)
Cable Twisted-pair:
■ 10BASE-T: 2-pair UTP Cat 3, 4, 5 for up to 100 meters
■ 100BASE-TX: 2-pair UTP Cat 5, 5e for up to 100 meters
■ 1000BASE-T: 4-pair UTP Cat 5e, 6 for up to 100 meters

Fiber-optic Cable:
1000BASE-SX:
50/125μm or 62.5/125μm multi-mode fiber-optic cable, up to 550m (varying on SFP module)
1000BASE-LX:
9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/70/120 kilometers (varying on SFP module)
Power over Ethernet
PoE Standard IEEE 802.3af / 802.3at PoE / PSE
PoE Power Supply Type End-span
Power Pin Assignment 1/2(+), 3/6(-)
PoE Power Output Per Port 54V DC, Max. 30.8 watts
PoE Power Budget ■ 420 watts (max.) @ 25 degrees C
■ 420 watts (max.) @ 50 degrees C
PoE Ability ■ PD @ 7 watts: 24 units
■ PD @ 15.4 watts: 24 units
■ PD @ 30 watts: 14 units
Layer 2 Functions
Port Configuration Port disable / enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status and trunk status
Port Mirroring TX / RX / Both
Many-to-1 monitor
VLAN 802.1Q tagged-based VLAN, up to 32 VLAN groups, out of 4094 VLAN IDs
Port-based VLAN, up to 26 VLAN groups
MTU VLAN
Link Aggregation 1 group of 2-Port 10/100/1000BASE-T trunk supported
QoS Allows to assign low / high priority on each port
First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy
IGMP Snooping IGMP (v1 / v2) Snooping, up to 32 multicast groups
Without Query supported
Security Control MAC address binding
TCP & UDP filter
Management Functions
Basic Management Interfaces Web browser, SNMP v1
Standards Conformance
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet over Fiber-Optic
IEEE 802.3x Full-duplex flow control
IEEE 802.1Q VLAN
IEEE 802.1p QoS
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Environment
Operating Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)

Dettagli del prodotto
FGSW2624HPS4
16 altri prodotti della stessa categoria:

Menu

Settings

Click for more products.
No produts were found.